Zenith chapter 2138ALKWM Instrucciones De Ensamblado página 8

6.
SAFETY WARNING: Make sure you are installing in a clean, dry and safe environment.
DO NOT STAND ON TUB LEDGE. We recommend the assistance of another person
during the installation.
Installation:
1. Lift the entire assembly into its final location.
2. While holding the inner tube of the twist tube (C), place the bottom end cap (F) on
the tub ledge or shower stall floor then raise the outer tube up until the top end cap (G)
is touching the ceiling. NOTE: THE BOTTOM MUST BE ON THE TUB LEDGE OR SHOWER
STALL FLOOR WHILE THE TOP IS TOUCHING THE CEILING.
3. Holding the assembly in place, twist outer tube in the direction of lock arrows on sticker
until VERY tight. NOTE: MAINTAIN UPWARD PRESSURE & TWIST UNTIL VERY TIGHT.
NOTE: To loosen the assembly, hold the inner tube and twist the outer tube in the
direction of unlock icon on sticker.
TOP
twist the outer tube in the direction of lock arrows on
sticker UNTIL VERY TIGHT
C
If you need any help with installation
please call 1-800-892-3986.
A
Pg 8 of 27 1-800-892-3986 IS02138-I3