Installing & Replacing The Battery - Etekcity EL11 Manual Del Usuario

Button
Battery
Holder
Hook
Installing & Replacing
the Battery
• Hold the scale in one hand, and
slide out the battery holder with
the other hand.
• Push corner A on the battery
holder outward to release the
battery.
• Insert the new battery under
notches B and C. Press the other
side of the battery until it clips into
corner A.
• Insert the battery holder back into
the scale.
NOTE:
• Battery type: 1 x 3 V CR2032
lithium battery.
• The LCD will display "Lo" when the
battery power is low. When this
occurs, you should replace the
battery as soon as possible.
EN
LCD
Display
Triangle
Ring
Webbing
Belt
Luggage
Handle
5