Weighing - Etekcity EL11 Manual Del Usuario

EN
Notch C

Weighing

1. Press the POWER button to turn
on the scale.
2. Press UNIT to select the weight
unit, if needed. If the scale does
not display 0, ensure there is no
stress on the triangle ring and
press the Z/T button.
3. Strap the belt on the scale through
the luggage handle and secure the
hook of the belt on the triangle
ring.
4. Lift the scale gently, making sure it
is horizontal and balanced. Wait
until the weight reading stabilizes,
flashes 3 times, and locks. The
scale will display the reading for 2
minutes, then shut off if no button
is pressed.
5. To weigh again, remove the
luggage or let the belt go slack and
press Z/T to reset the display to 0.
6
Battery Holder
Corner A
Notch B