Descargar Imprimir esta página

Technical Data; Cutting Attachment; Environmental Protection - Flymo C-Li 20VGT Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
Trouble
• Grass trimmer line not feeding
• Grass trimmer line too short
• Trimmer vibrates
Continuous clattering noise
Grass trimmer line snaps continuously
Motor specifi cations
Motor type
Motor voltage
Motor power
Noise and vibration data
Equivalent vibration level (ahv, eq) front handle. See Note 1.
Equivalent vibration level (ahv, eq) rear handle. See Note 1.
Sound power level, guaranteed (LWA). See Note 2.
Sound power level, measured. See Note 2.
Equivalent sound pressure level at the operator's ear. See Note 3.

Cutting attachment

Cutting diameter
Trimmer line diameter
Feed type
Unloaded speed
Product mass
Weight (without battery pack)
Weight (with battery pack)
Note 1: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1.5 m/s
Note 2: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/
EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives
the highest level. The difference between guaranteed and measured sound power is that the guaranteed sound power
also includes dispersion in the measurement result and the variations between different machines of the same model
according to Directive 2000/14/EC.
Note 3: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 3 dB(A).

Environmental protection

• Waste electrical products should not be disposed of with household waste.
• Please recycle where facilities exist.
• Check with your local authority or retailer for recycling advice.
Cause
Bump feed grass trimmer line not
working
Grass trimmer line not visible
Motor not reaching full speed before use
Too much grass trimmer line fed out
Grass trimmer line cutter missing
Incorrect trimming technique

TECHNICAL DATA

Remedy
Manually feed out grass trimmer line
Remove spool cap and spool, free grass trimmer
line and re-install spool and spool cap.
Allow the motor to reach full speed before use
Rewind grass trimmer line
Replace grass trimmer line cutter
Only use tip of grass trimmer line to trim
unit
V (DC)
W
m/s
2
2
m/s
dB(A)
dB(A)
dB(A)
cm (in)
mm (in)
min-1 (RPM)
kg (lb)
kg (lb)
C-Li 20VGT
Brushed
20
270
3.1
1.9
96
94
80.4
30.5 (12)
1.65 (0.065)
Bump feed line
7,800
2.39 (5.26)
2.79 (6.15)
2
.
11

Publicidad

loading