Safety Instructions For Operation; Additional Safety Instructions; Personal Protective Equipment - Flymo C-Li 20VGT Manual Del Usuario

• When not in use, store the machine out of the reach of
children.
Recommendation (For mains powered machines and
those with an integral charger)
• The machine should be supplied via a residual current
device (RCD) with a tripping current of not more than
• 30 mA.

SAFETY INSTRUCTIONS FOR OPERATION

• Make sure the product is fully assembled before you
use it.
• The product can cause objects to eject, which can
cause damage to the eyes. Always use an approved eye
protection when you operate the product.
• Be careful, a child can come near the product without
your knowledge during operation.
• Do not operate the product if there are persons in the
work area. Stop the product if a person goes into the
work area.
• Make sure that you are always in control of the product.
• Do not use the product if you cannot receive aid if an
accident occurs. Always make sure others know when
you use the product before you start operation.
• Do not turn with the product before you make sure that
no persons or animals are in the safety area.
• Remove all unwanted materials from the work area
before you start. If the cutting attachment hits an object,
the object can eject and cause injury or damage.
Unwanted material can wind around the cutting
attachment and cause damage.
• Do not use the product in bad weather, such as fog,
rain, strong winds, risk of lightning or other conditions.
Dangerous conditions, such as slippery surfaces, can
occur because of bad weather.
• Make sure that you can move freely and work in a stable
position.
• Make sure that you cannot fall when you use the
product. Do not tilt when you operate the product.
• Always hold the product with your two hands. Hold the
product on the right side of your body.
• Operate the product with the cutting attachment below
your waist.
• Stop the motor before you move the product.
• Do not put down the product with the motor on.
• Before you remove the unwanted materials from
the product, stop the motor and wait until the cutting
attachment stops. Let the cutting attachment stop before
you or an aide remove the cut material.

ADDITIONAL SAFETY INSTRUCTIONS

• Use the product correctly. Injury or death is a possible
result of incorrect use. Only use the product for the tasks
found in this manual. Do not use the product for other
tasks.
• Obey the instructions in this manual. Obey the safety
symbols and the safety instructions. If the operator
does not obey the instructions and the symbols, injury,
damage or death is a possible result.
• Do not discard this manual. Use the instructions to
assemble, to operate and to keep your product in good
condition. Use the instructions for correct installation
of attachments and accessories. Only use approved
attachments and accessories.
• Do not use a damaged product. Obey the maintenance
schedule. Only do the maintenance work that you fi nd
an instruction about in this manual. An approved service
center must do all other maintenance work.
• This manual cannot include all situations that can
occur when you use the product. Be careful and use
your common sense. Do not operate the product or do
maintenance to the product if you are not sure about the
situation. Speak to a product expert, your dealer, service
agent or approved service center for information.
• Remove the battery pack before you assemble the
product, put the product into storage or do maintenance.
• Do not use the product if it is changed from its initial
specifi cation. Do not change a part of the product
without approval from the manufacturer. Only use parts
that are approved by the manufacturer. Injury or death is
a possible result of incorrect maintenance.
• This product makes an electromagnetic fi eld. The
electromagnetic fi eld can cause damage to medical
implants. Speak to your physician and medical implant
manufacturer before you operate the product.
• Do not let a child operate the product. Do not let a
person, without knowledge of the instructions operate
the product.
• Make sure that you always monitor a person, with
decreased physical capacity or mental capacity, that
uses the product. A responsible adult must be there at
all times.
• Lock the product in an area that children and not
approved persons cannot access.
• The product can eject objects and cause injuries.
• Obey the safety instructions to decrease the risk of injury
or death.
• Do not go away from the product when the motor is
on. Stop the motor and make sure that the cutting
attachment does not turn.
• The operator of the product is responsible if an accident
occurs.
• Make sure that parts are not damaged before you use
the product.
• Make sure that you are at a minimum 10 m (30 ft)
away from other persons or animals before you use
the product. Make sure that a person in adjacent area
knows that you will use the product.
• Refer to national or local laws. They can prevent
or decrease the operation of the product in some
conditions.
VIBRATION EXPOSURE
Exposure to vibrations through prolonged use of power
tools could cause blood vessel or nerve damage in the
fi ngers, hands, and joints of people prone to circulation
disorders or abnormal swelling. Prolonged use in cold
weather has been linked to blood vessel damage in
otherwise healthy people. If symptoms occur such as
numbness, pain, loss of strength, change in skin color or
texture, or loss of feeling in the fi ngers, hands, or joints,
discontinue the use of this power tool and seek medical
attention. An anti-vibration system does not guarantee
the avoidance of these problems. Users who operate
power tools on a continual and regular basis must closely
monitor their physical condition and the condition of the
power tool.

PERSONAL PROTECTIVE EQUIPMENT

• Always use correct personal protective equipment
when you operate the product. The personal protective
equipment does not erase the risk of injury. The personal
protective equipment decreases the grade of injury if an
accident occurs.
• Always use an approved eye protection while you
operate the product.
• Do not operate the product with bare feet or with open
shoes. Always use heavy-duty slip-resistant boots.
• Use heavy, long pants.
7