Package Contents; Intended Use; Electrical Safety - DeWalt DWS779 Traducido De Las Instrucciones Originales

Example:
2016 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Assembled mitre saw
1 Blade wrench
1 Saw blade
1 Dustbag
1 Material clamp
1 Instruction manual
ʵ Check for damage to the tool, parts or accessories which may have
occurred during transport.
ʵ Take the time to thoroughly read and understand this manual prior
to operation.
Description (Fig. A1–E)

WARNING: Never modify the power tool or any part of it. Damage or
personal injury could result.
Fig. A1
Lower guard
1
Head up-lock release lever
2
Operating handle
3
Carrying handle
4
Motor housing
5
Motor end cap
6
Rail lock knob
7
Rail set screw adjustment
8
Date code
9
Rails
10
Bevel scale
11
Lock down pin
12
13 Fence adjustment knob
Fence
14
Base fence
15
Hand indentation
16
17 Table
Bench mounting holes
18
Mitre scale
19
Dust duct inlet
20
Mitre lock handle
21
Mitre latch button
22
Kerf plate
23
Fig. A2
Trigger switch
24
XPS™ on/off switch
25
Wing nut
26
Depth adjustment screw
27
Grooving stop
28
29 Blade wrench
Base
30
Bevel lock knob
31
0° bevel stop
32
33 Belt cover
Electronic speed control dial (DWS780 only)
34
Optional accessories
Fig. B
DE7082-XJ Workpiece clamp
35
Fig. C
DE7053-XJ Dustbag
36
Fig. D
DE7023-XJ / DE7033-XJ Leg stand
37
Fig. E
DE7025-XJ Clamp brackets
38

Intended Use

Your D WALT DWS779, DWS780 Mitre Saw has been designed for
e
professional cutting of wood, wood products and plastics. It performs the
sawing operations of cross-cutting, bevelling and mitring easily, accurately
and safely.
This unit is designed for use with a nominal blade diameter 305 mm carbide
tip blade.
DO nOT use under wet conditions or in the presence of flammable liquids
or gases.
These mitre saws are professional power tools.
DO nOT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.

WARNING! Do not use the machine for purposes other than intended.
• This product is not intended for use by persons (including children)
suffering from diminished physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are supervised by a person
responsible for their safety. Children should never be left alone with this
product.

Electrical Safety

The electric motor has been designed for one voltage only. Always check
that the power supply corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in accordance with
e
EN61029; therefore no earth wire is required.

WARNING: 115 V units have to be operated via a fail-safe isolating
transformer with an earth screen between the primary and secondary
winding.
If the supply cord is damaged, it must be replaced by a specially prepared
cord available through the D WALT service organisation.
e
Mains Plug Replacement (U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs. Recommended
fuse: 13 A.
Fitting a Mains Plug to 115 V Units
(U.K. and Ireland Only)
ʵ The plug fitted should be comply with BS EN 60309 (BS4343),
16 Amps, earthing contact position 4h.

WARNING: Always ensure that the cable clamp is correctly and
securely fitted to the sheath of the cable.
Using an Extension Cable
If an extension cable is required, use an approved 3–core extension cable
suitable for the power input of this tool (see Technical Data).The minimum
conductor size is 1.5 mm 2 ; the maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
EnGLISh
35