Electrical Safety; Package Contents - DeWalt DW744 Traducido De Las Instrucciones Originales

In spite of the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be
avoided. These are:
- Impairment of hearing.
- Risk of accidents caused by the uncovered parts of the rotating saw
blade.
- Risk of injury when changing the saw blade with unprotected hands.
- Risk of squeezing fi ngers when opening the guards.
- Health hazards caused by breathing dust developed when sawing
wood, especially oak, beech and MDF.
The following factors are of infl uence to noise production:
- the material to be cut
- the type of saw blade
- the feed force
The following factors are of infl uence to dust exposure:
- worn saw blade
- dust extractor with air velocity less than 20 m/s
- workpiece not exactly guided
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Wear respiratory protection.
Pull the plug from the socket when blade change or any
maintenance is needed.
Keep hands away from cutting area and the blade.
Carrying point.
DATE CODE POSITION
The Date Code, which also includes the year of manufacture, is printed into
the housing.
Example:
Year of Manufacture

Package contents

The package contains:
1 Partly assembled machine
1 Rip fence
1 Mitre gauge
1 Saw blade
1 Upper blade guard assembly
1 Table insert
1 Blade wrench
1 Arbor wrench
1 Dust extraction adapter
2009 XX XX
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories which may have
occurred during transport.
• Take the time to thoroughly read and understand this manual prior to
operation.
Description (fi g. A1 - A3)
A1
1 On/off switch
2 Mounting holes
3 Hand indentation
4 Table
5 Upper blade guard
6 Table insert
7 Rip fence
8 Rip scale indicator
9 Fine adjustment knob
10 Combined elevating and bevel control wheel
11 Bevel lock lever
12 Ripping position lock lever
A2
13 Rip fence latch
14 Dust extraction adapter
15 Push stick
16 Fence profi le
17 Locking knobs
18 Fence slot
A3
19 Mitre gauge
INTENDED USE
Your DW744XP/DW744-LX jobsite table saw has been designed to perform
the sawing operation of ripping, cross-cutting, bevelling and mitring in wood,
wood products and plastics. This unit is designed for use with a ø 250 mm
carbide tip blade.
WARNING: Do not use the machine for other purposes as
intended.
DO NOT use under wet conditions or in presence of flammable liquids or
gases.
These table saws are professional power tools.
DO NOT let children come into contact with the tool. Supervision is required
when inexperienced operators use this tool.

Electrical safety

The electric motor has been designed for one voltage only. Always check
that the power supply corresponds to the voltage on the rating plate.
WARNING: 115 V units have to be operated via a fail safe
isolating transformer with an earth screen between the
primary and secondary winding.
If the supply cord is damaged, it must be replaced by a specially prepared
cord available through the D WALT service organisation.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
E N G L I S H
21