Cequent Towing Products 75110 Instrucciones De Instalación

Hitch Shown In Proper Position
Equipment Required:
Fastener Kit: K75110
Wrenches: 7/8, 22mm
Drill Bits: None
Note: Fasteners typical
both sides
1
Qty. (4) Carriage Bolts 1/2-13 X 1.75
2
Qty. (4) Spacer
3
Qty. (4) Conical Washer
4
Qty. (4) Hex Nut 1/2-13
Note: For use on vehicles with Factory Bumper and brackets, only.
1. Remove existing M14 bumper bracket bolts on both sides from bottom surface of frame and return to vehicle owner.
2. Raise hitch into position and install as shown with fasteners provided.
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
z 1999, 2000, 2001, 2002, 2006 Cequent Towing Products
Installation Instructions
All require OEM bumper
Chevrolet Suburban*, Chevrolet Tahoe*,
GMC Yukon XL*, GMC Yukon*,
Cadillac Escalade, Chevrolet Avalanche,
*Vehicles with amber turn signals
Bumper
Frame rail
3
4
Tighten all 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
Tighten all M14 CL10.9 fasteners with torque wrench to 115 Lb.-Ft. (156 N*M)
Do Not Exceed Lower of Towing Vehicle
Hitch type
Weight Distributing
Weight Carrying
Ball Mount
Wiring Access Location: SUV6
1
2
5
Qty. (2) Hex Bolt M14 X 2.00 X 40mm
6
Qty. (2) Lock Washer
7
Qty. (2) Flat Washer
Sheet 1 of 3 N75110
Part Numbers:
75110
Manufacturer's Rating or
Max Gross
Trailer WT (LB)
8000 (3632 Kg)
5000 (2270 Kg)
Bumper bracket
Existing weldnut
7
6
5
7-24-06
Form: F205 Rev A 5-6-05
Max Tongue
WT (LB)
800 (363 Kg)
500 (227 Kg)
Rev. A