Temperature Settings - Cooke & Lewis WRMDRW60 Manual Del Usuario

02
Cleaning and heating up for the first time
Remove any protective film and wipe the inside of the appliance carefully with a well wrung damp cloth.
Dry with a soft cloth.
Switch the appliance on by touching the start " " button.
Touch the keep food warm "
Touch the temperature " " button.
Touch the " " / " " button until 80°C is displayed.
Press the time " " button.
Touch the " " / " " button until 2 hours is displayed.
Press the start " " button and close the drawer to start.
Note: There may be a slight smell emitted from the appliance when used for the first time; this is
perfectly normal.
Please ensure the kitchen is well ventilated.
03 Operation
1. In standby mode, press " " to select this function.
2. The default temperature "40°C" will display.
3. Touch " " or " " to adjust the temperature between 40°C and 60°C in 5°C increments.
4. Touch " " and then touch " " or " " to adjust the warming time between 1 and 6 hours, the default
setting is 6 hours.
5. Touch " " to save the temperature and time.
6. Close the door, there will be a beep and the appliance starts.
7. The appliance will beep three times when completed.
Note:
1. There will be a slight vibration of the front panel during use; this is perfectly normal.
2. Before closing the door, press the cancel " " button to start again.
3. Once the appliance has started, you can adjust the programmed parameters by opening the door
and repeating the above steps.
04

Temperature settings

Each function has its own temperature range as below. Use the " " or " " button to adjust this in
5°C increments.
40
45
50
55
60
MID10394 300000022 Warming Drawer v7b 3mm R.indd 20
" button.
Temperature ºC
60
65
70
75
80
60
65
70
75
80
20
08/05/2017 18:44