Publicidad
Idiomas disponibles
Idiomas disponibles
P
REPARING FOR
P
REPARING THE
In order to make the R
components are set up before issuing it to the patient. Set-up includes the following
steps:
Ensure that the SmartMedia Card is inserted correctly in the R
•
Ensure that the R
•
Ensure that the flow generator has been upgraded (if required—this can take up
•
to 20 minutes to complete).
Note: If you need to use an oximeter, it is also advisable to make sure that the oximeter
cable is correctly plugged into the ResLink.
P
REPARING THE
We recommend that you attach the oximeter sensor to the adhesive backing before
giving the device to patients. This simplifies the process because it removes possible
errors that can occur when aligning the sensor diodes with the adhesive backing.
8
P
ATIENT USE
R
L
ES
INK
system simple and easy to use, it is advisable that all
L
ES
INK
is attached to the flow generator.
L
ES
INK
O
(F
W
XIMETER
LEXI
Peel back then re-adhere after sensor is in place
8000J O
)
RAP
NLY
NB: check correct orientation
of sensor
.
ESLINK
Publicidad
