ResMed ResLink Manual Del Usuario página 12

P M
ATIENT ANAGEMENT
Before issuing the R
card are in the pouch. Check that the patient knows:
To use the Front key, not the power switch, to start and stop therapy each day.
•
That on the final night of therapy with the ResLink, always wait 15 minutes after
•
stopping therapy before powering off the flow generator at the power switch.
To remove the SmartMedia card only when the flow generator is powered off.
•
Whether to return the R
•
When to return the R
•
How to return the SmartMedia card using the Mailback card and a padded
•
envelope (if mailed).
If using the oximeter, how to attach it to their finger and how to use the six
•
oximeter readings to ensure a secure connection.
That there is a diode on the oximeter sensor that will emit a red light.
•
How to return the R
•
S M
MART EDIA
Do not discard SmartMedia cards: each SmartMedia card is reusable. When issuing a
SmartMedia card to a new patient, immediately replace the existing card label with a
new label on which you have written:
the new patient's name and address
•
the version number of any software upgrade on the card.
•
Extra labels can be obtained from your equipment supplier.
The serial numbers of upgraded flow generators are automatically stored on the
SmartMedia card. Contact ResMed if you wish to access this information.
P
ROTECTING DATA
Use the silver dot stickers (provided with the SmartMedia cards) if you wish to prevent
data stored on the SmartMedia cards from being overwritten.
The message 'Read-Only Card' will be displayed on the flow generator if a SmartMedia
card with a silver dot is inserted into a R
is write-protected and as a result the R
Place silver dot here
to protect data
, you should make sure that the User's Manual and Mailback
L
ES INK
or SmartMedia card.
L
ES INK
and SmartMedia card.
L
ES INK
.
L
ES INK
C M
ARD ANAGEMENT
ES
ES
. This indicates that the SmartMedia card
L
INK
cannot store any additional data.
L
INK
P
ATIENT
M
ANAGEMENT
9