Safety Notice - Qstarz BT-Q1300 Manual Del Usuario

English
................................................................................................................................................................................................................
C. Hardware Function
Hardware
Function
Power Jack
Power Button
(On)
Power Button
(Off)
Power Button
(Enable Log
mode)
Power Button
(Disable Log
mode)
Power Button
(Push to Log)
D. Safety Notice
Charging time is about 1 hour typically for this unit. We suggest
disconnecting the unit from the cigarette charger or AC charger
after the unit has been fully charged.
Be sure to use the supplied cigarette charger included in package;
otherwise excessive voltage may be applied to the unit and may
cause smoke, fire, or accident.
When the unit is not in use or not charged, we suggest
disconnecting the unit from the cigarette charger. Otherwise
battery drain may result.
Note that the built in battery cannot be charged outside the
temperature range 0℃ ~ 45℃.
.........................................................................................................................................................................................
2
Take the power cable and connect it to the power
jack (mini USB type) for charging only
Press power button and hold for 4 sec to power
BT‐Q1300 on.
Press power button and hold for 4 sec to power
BT‐Q1300 off
After power BT‐Q1300 on, press power button
and hold for 2 sec to enable log mode. Then
BT‐Q1300 would start logging with the blinking
LOG status LED (blue).
Press power button and hold for 2 sec again to
disable log mode. The LOG status LED (blue)
would be off, and stop logging.
Press power button once to push to log the
favorite Point of Interest
Description
www.Qstarz.com