Braun TrueScan BPW4100 Manual Del Usuario página 10

responding user's blood pressure data will not be deleted. The
delete operation must be confirmed by user.
Select mode
How to select user1/user2
• Make sure the product is in power off mode.
• Press the "user" button, and the current user mode will flash on
the LCD display.
• Press the "user" button again, it will change to another user
mode.
• When you have set the correct user mode, press the "power"
button to save the user mode and exit this setting.
• If you have selected the correct user mode and do not press a
button for 2 minutes, the product will shut off and save the user
mode you have selected automatically.
How to set date and time
• First turn off the product. Press the "set" button, and the
"month" will flash.
• Press the "adjust" button to change the current month.
(It can only be increased.)
• When the month is correct, press the "set" button again.
• Next the "date" will flash.
• Follow the same operation process to adjust the "date", "hour"
and "minute".
• When you finish the date/time setting, you can press the
"power" button to shut off the product or if you do not press a
button for 2 minutes, the product will shut off and save the user
mode you have selected automatically.
How to set positioning system ON/OFF
Should you wish to deactivate the positioning system proceed
as follows:
• First turn off the product.
• Press the "user" button and hold it for 5 seconds.
• If the "position system" is turned ON, the LCD will display "on". If
the "position system" is turned OFF, the LCD will display "off".
• Press the "user" button again, the state of "position system" will
be changed.
• When the "position system" has been set to your liking, you can
10