Material Disposal - Maggi STEFF 2034 Manual De Instrucciones

CHAPTER 6 - PUTTING OUT OF SERVICE
6-1 DISMALTING THE MACHINE
When demolishing/scrapping the
machine, observe the following
instructions:
- cut off the electrical connections
- empty the tanks containing the waste
oil
- only skilled and authorized personnel
may carry out the dismounting of the
machine.
It should be noted that the machine at
the end of its working life must be
managed like industrial waste and for
this reason waste collection, grading,
transport, management, disposal and
deposit on the soil must be carried out
according to the regultations in force
referring to the European Directive
91/156/EEC published on 18 March
1991 and 91/689/EEC published on
12 December 1991 and to its
subsequent modifications.

6-2 MATERIAL DISPOSAL

Elimination of electrical parts:
This material can be eliminated by
refuse disposal, according to the law
of the country where the machine is
used.
Elimination of mechanical parts:
The machine is made of aliminium,
steel and plastic.
Steel and aluminium do not cause
environment damage if they are
re c yc l ed b y s p ec i al i z ed
authorized companies
Elimination of waste oil:
The oils used during he working cycle
and/or during the maintenance of the
machine must be eliminated according
to the European Directive 91/156/EEC
published on 18 March 1991 and
91/689/EEC published
December 1991 which obliges every
firm managing waste oil to notify to the
relavant authorities the disposal of the
waste oils and of their residues.
It should be noted that it is compulsory
to apply to the
and
ASSOCIATION, according to the
European Directive 75/439/EEC.
EN
on 12
WASTE OIL
53