Adjusting The Frequency Of The Subwoofer(S); With Optional Equipment; Playing A Cd Or Md - Sony CDX-C880R Manual De Instrucciones

Adjusting the frequency
of the subwoofer(s)
To match the characteristics of the connected
subwoofer(s), you can cut out the unwanted
high and middle frequency signals entering
the subwoofer(s). By setting the cut-off
frequency, the subwoofer(s) will output only
low frequency signals for a clearer sound
image.
1
Press (SOURCE) to select a source (radio,
CD or MD).
2
Press (SHIFT), then press (3) (SET UP)
repeatedly until "LPF" appears.
3
Press (5) (n) or (2) (N) repeatedly to
select desired setting.
SET UP
Each time you press (5) (n) or (2) (N),
the cut-off frequency in the display changes
as follows:
LPF off ˜ LPF 80 Hz ˜ LPF 120 Hz
4
Press (SHIFT).
When the frequency setting is complete, the
display returns to the normal playback
mode.

With Optional Equipment

CD/MD Unit
You can control up to 7 CD and MD units with
this unit.
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a CD
TEXT disc.

Playing a CD or MD

1
Press (SOURCE) repeatedly to select the
CD or MD.
2
Press (MODE) until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Changing the displayed item
Each time you press (DSPL) during CD, CD
TEXT or MD playback, the item changes as
follows:
Elapsed playback time
Disc name* 1
Track name*
Clock
MOTION DISPLAY*
1 If you have not labelled the disc or if there is no
*
disc name prerecorded on the MD, "NO
D.Name" appears in the display.
2 If you play a CD TEXT disc, the artist name
*
appears in the display after the disc name. (Only
for CD TEXT discs with the artist name.)
3 If the track name of a CD TEXT disc or MD is not
*
prerecorded, "NO T.Name" appears in the
display.
4 AII the items above are scrolled in the display
*
one by one in order.
continue to next page n
$
$
/Artist name* 2
$
3
$
$
4
EN
27