METRICA 60833 Manual Del Usuario página 11

OPERATING MANUAL
KITS AVAILABLE
60833 Receiver with mounting brackets and cab report
60873 Receiver with magnetic clamp and cab report
60893 Receiver with mounting brackets and magnets with
car report
- 360° reception
- Receiver window length 25 cm
- Metal clamps (art. no. 60833)
- Strong magnets for mounting on the arm of the machine
(art. no. 60873)
- Sturdy clamps and strong magnets (Art. No. 60893)
- Detects red rotating laser beams of any brand
- IP66 dustproof metal housing (sensor only)
Supplied with
- Main receiver with built-in rechargeable battery, charger,
12/24V battery cable, hard storage case
- Cabin receiver with connection cable
1 ON/OFF button
2 Socket for charger
3 Receiver windows (4x)
4 LED for laser level indication
5 Fixing clamps
6 Charging indicator
7 Sealing plug for charger socket
8 Socket for cable connection to report or for 12/24V
battery cable (emergency power)
9 Socket for cable connection to the cell (socket 8)
10 LED for laser level indication
11 Bracket
12 Clamping screw
13 Socket for 12/24V battery cable (emergency power)
14 Sensor/port connection cable
Not shown
- 12/24V battery cable
- Charger
The main receiver is mounted to the machine by means of
strong magnets (item 60873) or two clamps (item 60833).
SWITCHING ON
Press the ON/OFF button once.
All LEDs will light up. After switching on, the Main Receiver
is in detection mode with basic accuracy. By pressing ON/
OFF again, the unit switches to fine detection mode.
BASIC/FINE ACCURACY DETECTION
To switch from one to the other, press the ON/OFF key.
11