Safety Notes; General Notes - Marklin Digital m83 Manual De Instrucciones

Safety Notes

• The m83 decoder is designed for use for digital model
railroads with the Motorola (MM), mfx, or DCC digital
systems.
• The operating instructions are a component part of
this product and must therefore be kept safe as well as
passed on with the product to third parties.
• Voltage for the m83 comes exclusively through track con-
nections or from the 66360/66365 switched mode power
pack (only in conjunction with 60822).
• Connections to the m83 decoder may only be done with
no voltage is present.
• IMPORTANT! The m83 has sharp edges and points due to
its function.
• The housing may not be opened.
• The m83 decoder is designed for use in dry areas only.
• The LEDs in this item correspond to Laser Class 1 accor-
ding to Standard EN 60825-1.

General Notes

• The m83 decoder (60832) is suitable for switching 1
Gauge, Märklin H0, Trix H0, and Trix N turnouts fitted with
a solenoid mechanism.
• These instructions describe the basic functions of the
m83 decoder and how it is connected. Additional details
and descriptions of further functions can be found in the
separate instructions available at www.maerklin.de (item
no. 60832).
• Further details can be found at www.maerklin.de
(item no. 60832).
10
2
1
ON
1 2 3 4 5 6 7 8 9 10
3
3
1 Dip switches for setting the address
2 Connection socket for 66360/66365 (only in conjunction
with 60822)
3 Plugs and sockets for direct connection of several
m83/m84 decoders
4 Set screw terminals for connections to the track
5 Set screw terminals for the turnouts to be controlled
3
5
4
3