Iso Ddin Radio Provision - Metra INST-123KI Instrucciones De Instalación

ISO DDIN radio provision

1. Determine which trim plate to use according to the chart and attach the
brackets to the trim plate. (Figure A)
2. Slide the radio into the trim plate/bracket assembly and secure to the assembly
using the screws supplied with the radio. (Figure B)
Figure A
®
INST-123KI
Kit Assembly
3. Locate the factory wiring harness and antenna connector in the dash. Metra
recommends using the proper mating adapter from Metra or AXXESS. Test the
radio for proper operation.
4. Reassemble the dash in reverse order of disassembly.
Figure B
9