GB
Please read this instruction manual
before using the device for the first
time and comply with it.
Keep this instruction manual for
future reference or for subsequent
possessors.
Note
It is not allowed to modify the appli-
ance or to manufacture additional
devices. Modifications can cause
injuries and malfunctions.
Only authorised and trained personnel are
■
allowed to repair the appliance. Only use
genuine spare parts from Adolf Würth GmbH
& Co. KG. This is to ensure and maintain safe
operation of the device.
Always adhere to the relevant national and
■
international regulations and laws for pin
firing tools, in particular regarding accident
prevention.
Non-compliance with and/or non-observance
of regulations and preventive measures as well
as legal regulations and accident prevention
regulations can cause injuries.
Always wear safety glasses, hearing protec-
■
tion, protective gloves and a hard helmet.
Keep always away from children and
do not leave it unattended.
For your safety
Disregarding this instruction manual and the safety
instructions may result in damage to the device
and may cause dangerous situations for the opera-
tor and other people.
In case of transport damage inform your vendor
immediately.
Safety instructions
Always store the device in a place where it is
■
secured effectively against unauthorized use.
Never work with the device if you have not
■
been trained in working with it.
Persons under the age of 18 years are not
■
allowed to operate the device. Except young
people aged over 16 undergoing apprentice-
ship training which are under supervision.
Do not pass the device to untrained personnel.
■
For further advice/training please contact
Würth customer service.
Before you start working check that the device
■
functions flawlessly and check whether it is
complete and in good working order. Do not
use a defective device.
Never point the device at a part of the body,
■
at yourself or at any other person.
Use the device only on suitable surfaces.
■
Always hold the device in a vertical position in
■
relation to the fastening surface. Avoid using
the device with your arms straight.
Even with the safety devices in operation, it is
■
possible that in case of incorrect use a shot
passes right through. Therefore, ensure that
nobody is in the vicinity or behind the point of
fixation.
WARNING – It is imperative that
the Safety instructions be read
before starting up the device for the
first time!
Never use the device in an explosive
or flammable atmosphere.
13