Cosatto RAC Come and Go i-Rotate Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 47
Removing the child car seat from your vehicle:
20:
Fully retract the support-leg (a & b).
21:
Press the side release button (a) and pull the seat away from the vehicle seat backrest
(b).
22:
Disengage the ISOFIX arms (a).
Remove the base from the vehicle seat and fold the support-leg (b).
Removing softgoods:
23:
Open the harness (refer to step 3).
Adjust the seat to sideward facing position (Refer to step 8) (a).
Open the rear compartment door (b).
Disconnect the chest pad connector (c).
24: Unfasten and remove the chest pad (a,b,c), seat liners (if applicable, d), wedge (if
applicable, e) & crotch pad (f ).
25: Remove the headrest cover (a).
26: Unfasten the seat cover fabric fasteners (a).
Release the fabric from hooks (b) and sides (c) of the seat unit.
Remove the seat cover (d).
Upper seat liner:
27: Refitting the inserts for the upper seat liner:
Tuck in tool:
28: Using the tuck in tool:
Checklist:
Have you check the compatibility of the child car seat with the
intended vehicle?
If applicable, is the air-bag de-activated?
Is your child car seat correctly fitted to the vehicle seat?
Have you check the safety indicators on ISOFIX arms, ISOFIX
support-leg?
Is your child correctly secure in the child car seat?
Is harness adequately tensioned and not twisted?
6

Publicidad

Tabla de contenido
loading

Tabla de contenido