Installation of water inlet hose
Firmly tighten the other end of the water inlet hose on the water inlet valve (with the
rubber seal inside).
NOTE: When tightening the locking nut, apply an even force being careful not to twist or
break the water inlet valve.
WARNINGS:
• ALWAYS USE THE NEW INLET HOSES PROVIDED WITH THE
WASHER. DO NOT REUSE PREVIOUS OR OLD INLET HOSES.
• THE APPLIANCE VENT HOLES SHOULD NOT BE OBSTRUCTED BY A
MAT OR CARPET.
• THIS APPLIANCE WAS DESIGNED FOR INDOOR USE ONLY.
30
Water
Inlet
Locking
Hose
Nut