Operation Instructions
Using the detergent for two
different loads
1. Add the first load, the detergent and se-
lect SOIL LEVEL (WASH) only.
2. Remove the first load from the washer
after hearing the buzzer signal.
3. Add a second load into de tub and run a
complete SOIL LEVEL (WASH), RINSE
TYPE (RINSE) and SPIN LEVEL (SPIN)
cycle.
4. Remove the second load from the
washer after hearing the buzzer signal.
5. Add the first load into the tub and select
RINSE TYPE (RINSE) and SPIN LEVEL
(SPIN) only.
Special Features
DELAY START
This feature delays the starting time of a
wash program.
1. Turn on the power.
2. Open the water supply tap and lay down
the drain hose, or hang the drain hose
depending on your washer's drain sys-
tem.
3. Add the clothes and detergent.
4. Select the proper water level according
to the size of the load.
5. Select the desired program and options.
6. Press the DELAY pad to select the start-
ing time for washing.
7. Close the lid and press the START/PAUSE
pad.
36
Important:
• Washer lid must remain closed when the
machine is running, otherwise it will stop
working during spin and will send an er-
ror warning.
• The washer will not start if water does not
reach the set water level.
Tiempo Restante
Retrasar Inicio
(horas)
The display adds one unit each time each
time the DELAY START pad is pressed until
reaching "24" (hours). Then the display
adds 6 units each time the DELAY START
pad is pressed. Once the display reaches
"48" (hours) the indicator light will turn off
the next time the pad is pressed and the
DELAY START feature returns to its original
setting.