Operation And Maintenance; Technical Parameters; Environmental Protection - GRAPHITE 58G027 Manual Del Usuario

Slight run out of the working tool that can be sometimes observed after
starting the tool without load is normal. Working tool centres automatically at
touching processed material. In no way it affects precision of drilling.

OPERATION AND MAINTENANCE

Remove the battery from the device before commencing any
activities related to installation, adjustment, repair or maintenance.
MAINTENANCE AND STORAGE
• Cleaning the device after each use is recommended.
• Do not use water or any other liquid for cleaning.
• Clean the device with a dry cloth or blow through with compressed air at
low pressure.
• Do not use any cleaning agents or solvents, they may damage plastic parts.
• Clean ventilation holes in the motor casing regularly to prevent device
overheating.
• Always store the tool in a dry place, beyond reach of children.
• Store the device with the battery removed.
All defects should be repaired by service workshop authorized by the
manufacturer.

TECHNICAL PARAMETERS

RATED PARAMETERS
Cordless Rotary Hammer Drill 58G027
Parameter
Battery voltage
Rated rotational speed
Impact rate
Impact energy
Working tool shank
Drilling diameter – wood
Drilling diameter – steel
Drilling diameter – concrete
Protection class
Weight
Year of production
58G027 defines type and indication of the device
Graphite Energy+ System Battery
Parameter
Battery
Battery voltage
Battery type
Battery capacity
Ambient temperature range
Charging time for charger 58G002
Weight
Year of production
Charger type
Supply voltage
Power supply frequency
Charging voltage
Max. charging current
Ambient temperature range
Charging time of the battery 58G001
Charging time of the battery 58G004
Protection class
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure level: Lp
Sound power level: Lw
Vibration acceleration value (additional handle): ah = 6,052 m/s
Vibration acceleration value (main handle): ah = 5,783 m/s
Noise produced by the device is defined with: level of produced sound
pressure Lp
uncertainty). Vibrations produced by the device are defined with vibration
acceleration value a
Value
Sound pressure Lp
in this manual have been measured in accordance with EN 60745-1. Specified
18 V DC
vibration level a
0–1420 rpm
exposition to vibrations.
Specified vibration level is representative for main applications of the device.
0–5000 min
-1
When the device is used for other purposes or with different working tools,
2.2J
the vibration level may change. Insufficient or too rare maintenance may
increase vibration level. The abovementioned factors may lead to higher
SDS Plus
exposure to vibrations during whole working time.
28 mm To precisely define exposure to vibrations, include periods when the device
is switched off and when it is switched on but not used for working. Once all
13 mm
factors have been carefully considered, total exposition to vibrations may be
significantly lower.
22 mm
To protect the user from results of exposure to vibrations, use additional
III
safety measures such as: device and working tool periodic maintenance,
proper hand temperature conditions, good work organisation.
2.1 kg
2020
Value
58G001 58G004
18 V DC 18 V DC
Li-Ion Li-Ion
2000 mAh 4000 mAh
4 C – 40 C 4 C – 40 C
0 0 0 0
1 h 2 h
0,400 kg 0,650 kg * Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat
2020 2020
in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs, that all copyrights to
this instruction (hereinafter Instruction), including, but not limited to, text, photographies,
schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and
are protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004
(ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later
ammendments). Copying, processing, publishing, modifications for commercial purposes
of the entire Instruction or its parts without written permission of Grupa Topex are strictly
forbidden and may cause civil and legal liability.
14
Graphite Energy+ System Charger
Parameter
= 86,4 dB (A) K=3dB (A)
A
=97,4 dB (A) K=3dB (A)
A
and level of sound power Lw
A
(where K is measurement uncertainty).
h
, sound power Lw and vibration acceleration ah specified
A A
can be used to compare tools and for initial evaluation of
h

ENVIRONMENTAL PROTECTION

Electrical equipment must not be disposed off with
household waste and, instead, should be utilized at
appropriate facilities. Information on utilization can be
provided by the product vendor or the local authorities.
Waste electrical and electronic equipment contains
substances that are not neutral to the natural environment.
Equipment that is not recycled constitutes a potential hazard
to the environment and to human health.
Storage batteries/batteries must not be disposed with
domestic waste, put in a fire or into the water. Damaged
or used up storage batteries must be properly recycled in
compliance with the current directive pertaining to disposal
of storage batteries and batteries.
Li-Ion
Value
58G002
230 V AC
50 Hz
22 V DC
2300 mA
4 C – 40 C
0 0
1 h
2 h
II
0,300 kg
2020
2 K= 1,5 m/s 2
K= 1,5 m/s
2 2
(where K is measurement
A