Z-BEN H.264 Manual Del Usuario página 20

Pantalla gui controlada por el ratón
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 280
2)
START TIME / END TIME
Set the start time and end time.
3)
ADJUST
Set the time in HOUR : MIN.
5.3 SYSTEM
5.3.1 TOOLS
TOOLS
SYSTEM INFO
USB BACKUP
DVD BACKUP
EXIT
1)
LANGUAGE
Select the language of the OSD.
2)
ADMIN PASSWORD
Click "SETUP" to change the administrator password. The default administrator password is 0000.
When you're prompted to enter the DVR password, enter the administrator password, and
on the status bar of the screen and all operations are allowed.
3)
OPERATOR PASSWORD
Click "SETUP" to set or change the operator password. .
When you're prompted to enter the DVR password, enter the operator password, and
the status bar of the screen and the main menu is NOT allowed to access.
4)
UPGRADE
Save the upgrade files obtained from your installer or distributor in a compatible USB flash drive, and insert it
into the USB port at the front panel. Then, click "SUBMIT" to start upgrading.
Note: Before using the USB flash drive, please use your PC to format the USB flash drive to FAT32 format
first. For the list of compatible USB flash drives, please refer to "APPENDIX 3 COMPATIBLE USB
FLASH DRIVE LIST" at page 48.
Note: After upgrading firmware, it's recommended to clear all HDD data for the system to work more
stably. Before clearing all HDD data, please remember to make video backup.
SYSTEM
LANGUAGE
ADMIN PASSWORD
OPERATOR PASSWORD
UPGRADE
ENGLISH
SETUP
SETUP
SUBMIT
16
MAIN MENU
will be shown
will be shown on

Publicidad

Tabla de contenido
loading

Tabla de contenido