Display; De-Interlace - Z-BEN H.264 Manual Del Usuario

5.5.6 DISPLAY

CAMERA
DETECTION
ALERT
NETWORK
SNTP
DISPLAY
RECORD
REMOTE
DCCS
IVS
EXIT
1)

DE-INTERLACE

Select to enable or disable the de-interlace function (ON / OFF).
Note: If you set the recording image size as "FRAME", please TURN ON de-interlace function.
If you set the recording image size as "CIF", please TURN OFF the de-interlace function.
2) SCREEN DWELL DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
3) VGA OUTPUT
Here shows the current VGA output resolution.
4) DISPLAY COVERT
Select "ON" or "OFF" to display or hide the wording "COV." When covert recording is activated in
"CAMERA".
5) HDD DISPLAY MODE
Select "SIZE" to show the remaining HDD capacity for recording in GB, or "TIME" to show the remaining
recording time.
6) DISPLAY OUTPUT PATH
The default video output setting is "AUTO", meaning the DVR will automatically detect the video output
source. When a CRT monitor and LCD monitor are both connected, the default video output is via the
connected LCD monitor.
Select "VGA" to fix the video output via the connected LCD monitor, or "COMPOSITE" to fix the video output
via the connected CRT monitor.
When the change is made, the DVR will then reboot for the change to take effect.
7) ALPHA BLENDING
Click to manually adjust the transparent level of the main menu.
ADVANCE CONFIG
DE-INTERLACE
(For Selected Models Only)
SCREEN DWELL DURATION
VGA OUTPUT
DISPLAY COVERT
HDD DISPLAY MODE
DISPLAY OUTPUT PATH
ALPHA BLENDING
OFF
03
1024 X 768
ON
HDD SIZE
AUTO
200
24
MAIN MENU