Publicidad
1. Warning
Before starting the unit you must read, take into consideration and comply with all the indications
described in this Manual.
This manual must be kept in a safe place, accessible to all users of the unit.
The unit must be started and handled exclusively by personnel instructed in its use and must be
employed only for the purpose for which it was designed.
Likewise, accident prevention standards, regulations, work centre directives and current legisla-
tion and restrictions must be taken into consideration at all times.
SAGOLA S.A.U., the logotypes of SAGOLA and other SAGOLA products mentioned in this manual,
are registered trademarks or brand names of the company SAGOLA S.A.U.
2. Introduction
This unit belongs a the family of devices designed to spray products with compressed air with a
spray gun, providing a high level of product transfer (T > 65%) and excellent quality finish, as well
as low levels of contamination.
The equipment consists of the following:
_ Spray gun
_ Accessory wrench
_ Cleaning brush
_ Case
3. Technical details
Unit with product-feed by gravity (hereinafter the Gun) with Tip and Air Nozzle of the type described
in the packaging.
0.65 litres, made of plastic, with non-drip cap and device to catch any spilt product.
Air input pressure: maximum 8 bar
Net weight: (with internal flow regulator) with cup.......................................................................668 g.
Connection for compressed air hose, threaded, male BSP 1/4"x19hp
o
Maximum operating temperature from 0 to 50
C
Recommended working pressure not in excess of 2 bar (measured at the air inlet and recorded
in this).
Air consumption according to Tip Table.
Normative ATEX (2014/34/UE)
o
- Non electric equipments:
II 2G T60
C X (*)
(*) Non electric gun in explosion hazard areas (ATEX) must have the earthing connections and/or static-free feed hoses.
ENGLISH
Publicidad
