Technical Data - Montarbo EARTH PRO Serie Manual De Uso

EARTH PRO

TECHNICAL DATA

10
EARTH PRO 115A
ACOUSTIC FEATURES
system 6° order Band-Pass
frequency range -6dB) 35 Hz - 200 Hz
omni
coverage
max SPL(peak)
135 dB SPL
IECnoise@1m
TRANSDUCER
LF 15" Long-Excursion with 4" voice coil
AMPLIFIER FEATURES
power supply Universal, PFC, Regulated switch mode
type Class D - 1 Channels
output power RMS 1600 W
Connections PowerconTRUE1
Protections Thermal protections, Short-circuit/overload
Operating temperature 0°C to 45°C
DSP FEATURES
Preset 4 preset Factory and 4 preser User
DSP 24 bit 96kHz
Filter M-Modelling
Connections 1 XLR Input / 1 XLR Output / 2 x Ethercon (Control + Dante)
Protections Limiter, Clip Limiter
ENCLOSURE
Width 580 mm (22,8 in. )
Height
476 mm (18,3 in.)
Depth
750 mm (29,5 in.)
Net Weigh 50,1 kg (110,45 lb)
Housing Black Polyurea 15 mm Birch Plywood Black painted Steel
Hardware 4 x M10 Flying Points, 2 Slide Handles M20 Pole Mount, Built-in hardware for sospension
System monitoring M-Connect Ethernet TCP/IP - 1 Gigabit
28
EARTH PRO 118A
30 Hz - 200 Hz
139 dB SPL
18" Long-Excursion with 4" voice coil
2400 W
580 mm (13,6 in.)
696 mm (24,8 in.)
750 mm (16 in.)
62,2 kg (137,12 lb)
EARTH PRO 115A
Enclosure 6° order Band-Pass
Components Custom-designed to Montarbo
LF 1 x 15" Long-Excursion with 4" voice coil
Frequency response 35 Hz - 200 Hz
Continuous SPL 135 dB
Built-in amplifier 1 class-D power units
LF+HF power RMS 1600 W
Built-in DSP Montarbo ® 24bit 96kHz converter, M-Modeling
Connections and controls 1 XLR Input / 1 XLR Output
2 x Ethercon (Control + Dante)
Construction 15 mm Birch Plywood, paint Black Polyurea, grille Black painted Stee
Fittings 4 x M10 Flying Points, 2 Side Handles M20 Pole Mount Built-in hardware for suspension
Dimensions W 580 x H 476 x D 750 mm
Weight 50,1 kg
EARTH PRO 118A
Enclosure
6° order Band-Pass
Components Custom-designed to Montarbo
LF 1 x 18" Long-Excursion with 4" voice coil
Frequency response 30 Hz - 200 Hz
Continuous SPL 139 dB
Built-in amplifier 1 class-D power units
LF+HF power RMS
2400 W
Built-in DSP Montarbo 24bit 96kHz converter, M-Modeling
®
Connections and controls 1 XLR Input / 1 XLR Output
2 x Ethercon (Control + Dante)
Construction 15 mm Birch Plywood, paint Black Polyurea, grille Black painted Stee
Fittings
4 x M10 Flying Points, 2 Side Handles M20 Pole Mount Built-in hardware for suspension
Dimensions W 580 x H 696 x D 750 mm
Weight 62,2 kg
User manual
® specifications.
specifications.
®
29