Product Specifications - Craftsman 580.752300 Instrucciones De Uso

PRODUCT SPECIFICATIONS
Pressure Washer Specifications
Pressure ..................... 3,800 PSi
Flow Rate ..................... 4.0 GPM
DetergentMix ................. Useas directed
Water Supply Temperature ....... Not to exceed IO0°F
Pump Oil Capacity.............. 12 fl. oz. (0.35 I)
Engine Specifications
RatedHorsepower ............... 13 at 3600 rpm
Bore .......................... 3.5 in. (88 ram)
Stroke ......................... 2.5 in. (64 ram)
Displacement................... 23.7 in. (389 cc)
Spark Plug
Resistor .................... NGK BPR6ES
Set GapTo: ................... 0.028-0.031 in (0.70-0.80
ram)
IntakeValveClearance ............ 0.15 _+ 0.02 mm (cold)
ExhaustValveClearance ........... 0.20 _+ 0.02 mm (cold)
FuelCapacity ................... 1.72 Gallons
Oil Type ....................... SAE10W-30
This pressure washer is rated in accordanceto the Pressure
Washer Manufacture Association (PWMA) standard PW101
(Testing and Rating Performance of Pressure Washers).
OWNER'SRESPONSIBILITIES
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.
Maintenance Schedule
[i[ i[ i[i[i[[ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [
• Changeengine oil
2
3
4
5
• Check/clean water inlet screen1
Check high pressure hose
• Check detergent siphoning hose
• Check spray gun and assembly for leaks
• Clean debris
• Check air filter
• Check engine oil level
[ [[[ iii [[[[[[[[
• Cleanair filter'
} }: }: } [ t : ii }f}}: }: }: }: }} } } } } } } } } } } } } } } } } } } } } } }_
• Changeengine oil
• Cleansediment cup
• Check/adjust spark plug
• Service spark arrester1
• Cleanfuel tank and filter
-- =
• Change pump oil_
):):) ))))):):)):):) ))))))))))))))))))))))))
• Replace air filter s
• Replace spark plug
• Check adjust idle speed'
• Check adjust valve clearance _
[_J JJt[
• Cleancumbustion chamber'
tLtLtLt i_ }[iJ[ 1iLL: J[ [ [[i[[ [ [[[ ij[ [ [j[ [ [iij[ [ Li}iL LJL LLLLL L L L L L L L L L L L
• Check fuel tube (replace if necessary)'
Clean if clogged. Replace if perforated or torn.
Service more often under dirty or dusty conditions.
Replace paper element only.
These items should be serviced by your servicing dealer.
Change after first 50 hours of operation and then every 200 hours or 3 mooths,
whichever occurs first.
14