Kuppersbusch DEF6800.0 Instrucciones De Uso página 18

the extractor is used. Note that grease is deposited in the
extractor when cooking, whether it is switched on or not.
 We recommend the use of gloves and caution when cleaning
the inside of the extractor.
Repairs
 If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
 Do not switch on the extractor if the supply cord is worn or
has cuts or if there are signs of deterioration around the
control panel.
 If the LED module is malfunctioning, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

If the extractor stops working or functions abnormally,
unplug it from the mains and contact the technical service.
A Motor push control that allow 6 speeds
to be selected
Intensive
5
4
3
2
1
B Lamp push control
To achieve better extraction, we recommend
switching on the extractor a few minutes
before starting to cook (3 - 5 minutes) so that
the air flow is continuous and stable when
extracting the fumes.
18
th
Speed
th
Speed
rd
Speed
nd
Speed
st
Speed
-
C Lighting by means of lamps
D Filters located over cooking area, easily
withdrawn for cleaning
E Extractable group that allows a greater
gas capture area
F Possibility of incorporating activated
charcoal filter (Fig. 2)
G-H Anti return tabs to be located in the
outlet mouth, locating their ends in the
holes provided (Fig.5).
Likewise, keep the extractor switched on for a
few minutes when cooking is complete to
allow all fumes and odours to be expelled.