Replacing.HArd.DRives; Notes When Replacing Hard Drive - Buffalo HD-QLU3R5 Manual De Usuario

Ocultar thumbs Ver también para HD-QLU3R5:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 82
If a hard drive fails, the corresponding disk access LED on the front of the DriveStation will glow red.
Obtain another hard drive with the same capacity to replace the failed hard drive.
■ Using in RAID 5, RAID 10, or RAID 1 Mode
The access LED for the failed hard drive glows red. Turn off the DriveStation, remove the AC adapter, and
replace the hard drive.
■ Using in RAID 0, Spanning, or Normal Mode
If a drive fails when using in RAID0 Mode, Spanning Mode, or Normal Mode, the data in the RAID array
and data in the hard drive is lost. The data cannot be recovered even if the hard drive is replaced.
Under "Status" for the failed drive number, the text "Error occurred" is displayed. Turn off the DriveStation
and replace the failed hard drive.

Notes When Replacing Hard Drive

・ The DriveStation is a precision device. Handle it with care, and do not drop it or subject it to sudden
jolts or impact.
・ The DriveStation weighs about 5.5 kg. Handle it with care to prevent injury.
・ The front panel is attached to the front of the DriveStation body by magnets. If the DriveStation is
lifted by the front panel, it could become detached from the body and fall. When lifting, be sure to
always grasp the sides of DriveStation body to take it out.
・ Perform the replacement work carefully, and take care to avoid injuring your hands on the metal
parts inside the DriveStation.
・ When replacing the hard drive, never disassemble parts whose instructions are not provided in this
manual. Be aware that any breakdowns or damage due to disassembly of the DriveStation are outside
the scope of the warranty.
・ To prevent damage due to electrostatic discharges, touch your hand on a nearby metal object (such
as a door knob or aluminum window frame) to discharge any built-up static electricity.
・ Operation is not possible if all four hard drives in the DriveStation are replaced at the same time.
・ Operation is not guaranteed when using hard drives other than the specific hard drives with the
same capacity designated for replacement.
34
HD-QLU3 User Manual
Replacing Hard Drives

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido