Sennheiser MOMENTUM M3IETW Instrucciones Resumidas página 13

Using the earphones
3. Connect the USB-A connector to a corresponding socket of a USB
power source (to be ordered separately). Make sure that the USB
power source is connected to the power supply system.
The rechargeable batteries of the earphones and the charging
case are being charged.
If no earphones are inserted into the charging case, only the
rechargeable battery of the charging case is being charged.
The LED of the charging case displays the charge status:
LED
pulses 
yellow
lights up
green
flashes
red
Connecting the earphones to a Bluetooth
device
To be able to use the Bluetooth wireless connection, you must regis-
ter both devices (earphones and e.g. smartphone) via the device set-
tings of your smartphone. This process is called pairing.
If operation differs from the steps mentioned, also refer to the inst-
ruction manual of the Bluetooth device you are using.
If you switch the earphones on for the first time after initial
charging, they automatically go into pairing mode.
Information on the Bluetooth wireless
connection
The earphones are compatible with Bluetooth 5.0.
If your audio source supports one of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: aptX, aptX® LL or AAC. Otherwise the headphones will play
your music in normal audio quality (SBC).
Paired devices establish the Bluetooth wireless connection immedi-
ately after switch-on and are ready for use.
When you switch the earphones on, they automatically try to
connect to the last connected Bluetooth device. The earphones can
save the connection profiles of up to eight Bluetooth devices with
which they have been paired.
Charging case WITH
earbuds inserted
... earbuds and char-
ging case are being
charged
... earbuds and char-
ging case are fully
charged
... a charging error/
battery error has
been detected in at
least one earbud (>
26)
MOMENTUM True Wireless | 13
Charging case
WITHOUT earbuds
inserted
... charging case is
being charged
... charging case is
fully charged
... a charging error/
battery error has
been detected in the
charging case (> 26)