Operation; Start And Stop; Operating; Starting A Cut - Chicago Pneumatic CP 0006 Instrucciones De Seguridad Y De Funcionamiento

CP 0006, CP 0006 SVR, CP 0066

Operation

WARNING Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
► Learn how the machine is switched off in the event
of an emergency.
Stop the machine immediately in all cases of
►
power supply interruption.

Start and stop

CP 0006
CP 0006 SVR
CP 0066
Start the machine by squeezing the start and stop
♦
device (A) while firmly holding the handle.
9800 0611 90 | Original instructions
Safety and operating instructions
CP 0006
CP 0006 SVR
CP 0066
♦ Stop the machine by releasing the start and stop
device (B). The start and stop device returns
automatically to the stop position.

Operating

Starting a cut

Stand in a stable position, holding the scabbler
♦
with both your hands.
Press the scabbler slightly against the working
♦
surface, before you start.
Working
♦ Let the machine do the work; do not press too
hard.
Any form of idling or operating with an uplifted
♦
machine must be avoided.
When the machine is lifted, the start and stop
♦
device must not be activated.
Check that the compressed air is clean, dry and
♦
free from lubrication.
13