Operation; Using The Appliance - Wilfa POWER FUEL XL Manual De Instrucciones

OPERATION

EN
BEFORE FIRST TIME USE
Clean the unit and parts thoroughly before you use the unit for the first time (See
cleaning instructions)

USING THE APPLIANCE

• There is a jar sensor on the blender base. When blender jar is placed on the
unit, all the functions and time controls can be selected.
• Make sure the indicator is set to 0 when you start the blender.
• Put the desired ingredients into the jug.
• Mount the lid onto the jug and insert the lid cap or tamper.
• Select the desired pre-set by turning the wheel anti-clockwise and press the
start button in the middle of the display. The product will run the selected
program automatically, after program is completed, the blender will enter
standby mode.
• Select speed manually by turning the wheel clockwise.
• If you want to pause the blender during the run, press pause in the middle of
the display.
• The time counter is shown on the display.
• Start / Pause button: Press the start / pause button to start the selected pre-
set, or to pause the operation while the motor is running.
• Manual Pulse: Press and hold pulse on the display if you want to use the pulse
function. The motor will increase to full speed in pulse mode. Motor will stop
when user release the finger. After releasing, the product will return to stand-
by mode.
The 3 preset programs:
Function
Hot soup
Ice crush
Smoothie
INSTRUCTION MANUAL · POWER BLENDER
10
Operation Cycle
8:00 minutes
24 seconds
1:56 minutes