Schön 67416-3A01 Guía De Uso Y Mantenimiento página 5

Installation (continued)
4
Installing the spout assembly
□
Install the spout assembly (A) onto the
connector (D). Be sure the spout assembly
is resting rmly on the deck.
□
Push down on spout and tighten set screw (B)
with the Hex wrench (AA). Insert the index (C).
A
AA C
B
D
5
Installing the hot and cold
valves and handle assemblies
□
From underneath the deck, insert the cold end
valve (L) with the rubber washer (M), metal
washer (N), and mounting nut (O) through the
hole on the right (cold) side.
□
From above, thread the ange (J) onto the valve.
□
Tighten the mounting nut (O) using a basin
wrench, so that the ange (J) sits ush against
the nished deck surface.
□
Thread the handle (I) onto the ange (J).
□
Repeat this procedure for the hot end valve (K)
on the left (hot) side.
K
5
Please contact (800) 880-8164 for further assistance.
I
J
1
L
M
N
O
www.schonsimplymodern.com