16"
(40.6 cm)
1"
(2.5 cm)
7-3/4" (19.7 cm)
2-7/8"
(7.3 cm)
Product Information
Applicable product:
Drop-in rim style
Left drain hole, integral flange
Right drain hole, integral flange
Fixture*:
Bathing well:
Basin area, bottom
46" (154.9 cm) x 20" (50.8 cm)
Basin area, top
55" (139.7 cm) x 22" (56 cm)
Weight
54 lbs (24 kg)
To overflow:
Water depth
12-1/2" (31.8 cm)
Capacity
49 gal (185 L)
* Approximate measurements for comparison only.
V
Pump: 1-speed
120
Heater: 1.5 kW
120
Drop-in cutout
58-1/2" (148.6 cm) x 30-1/2" (77.5 cm)
Minimum access panel
pump/control (required):
1012640-1-C
60" (152.4 cm)
1/4" (6 mm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1106-H
K-1106-LH
K-1106-RH
Hz
A
60
7.5
60
12.5
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected
with drain illustrated. (K-11677 or K-11677M)
Pump/Control Access (if apron is not used)
20" (50.8 cm) W x 15" (38.1 cm) H Min
1-1/2"
32" (81.3 cm)
(3.8 cm)
18-1/8"
(46 cm)
1-1/2" OD
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
37 lbs/square foot (178 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-In
Rim Detail
1-1/4"
(3.2 cm)
Tile Flange
Detail
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.