HandHeld Quick Check 890 Guia De Inicio Rapido página 8

To establish a Bluetooth connection to a PDA or a Hand Held Products Mobility
Systems device, scan the barcode below, follow the instructions supplied with
your Bluetooth device to locate the QC890 Verifier, and connect to it. If you go
out of range with your QC890 Verifier, the QC890 Verifier will not reconnect. It
will be up to the host device to reconnect to the QC890 Verifier.
Bluetooth Connection - PDA/Mobility Systems Device
Example of Bluetooth QC890 Device Search Result
Once you initiate a search for devices, a display similar to the one below appears
on the host device. The serial number display allows you to confirm that the
correct QC890 Verifier has been found. Refer to the Quick Check 890 Verifier
User's Guide for details on the making the Bluetooth connection.
Using Quick Check ImageData
For the PC version of Quick Check ImageData, go to Start->All Programs-
>Hand Held Products->Quick Check ImageData, or double click the Quick
Check ImageData icon on your desktop (set up during installation).
For the PDA version, start Quick Check ImageData by clicking on Start-
>Programs. Select the Quick Check ImageData icon.
EN-6