Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Installation instructions for part 95-9012
VW multi-kit 1999-2006
KIT FEATURES
• ISO DDIN radio provision
KIT COMPONENTS
• A) Radio housing • B) (8) Phillips 5mm screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1784 • XSVI-9003
Antenna Adapter: • 40-VW53 • 40-EU55
VOLKSWAGEN
Golf
1998-2006
METRA. The World's best kits.
®
95-9012
APPLICATIONS
GTI
1998-2005
Passat
Jetta
1998-2005
®
2000-2005
metraonline.com
U.S. PATENT # D639,291
Table of Contents
Dash Disassembly ..................................................2
Kit Assembly
– ISO DDIN radio provision ...................................... 3
TOOLS REQUIRED
• Panel removal tool • 86-9001 Radio removal tools (2 sets)
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION

Publicidad

loading

Resumen de contenidos para Metra 95-9012

  • Página 1 KIT COMPONENTS • A) Radio housing • B) (8) Phillips 5mm screws CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle WIRING & ANTENNA CONNECTIONS (sold separately) manufacturer recommends against so. Please check with your local Wiring Harness: •...
  • Página 2: Dash Disassembly

    ® 95-9012 Dash Disassembly For double DIN factory radios: 1. Insert the long ends of the 86- 9001 radio removal tools into the (4) slots on the factory radio, and then pull out to remove the radio. (Figure A) Note: The flat edge of keys should point outward.
  • Página 3: Kit Assembly

    2. Locate the factory wiring harness and antenna connector in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation. 3. Test the radio for proper operation.
  • Página 4: Important

    ® Installation instructions for part 95-9012 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
  • Página 5: Herramientas Requeridas

    ® Instrucciones de instalación para la pieza 95-9012 U.S. PATENT # D639,291 Indice VW multi-kit 1999-2006 95-9012 Desmontaje tablero ..........2 Ensamble del kit – Provisión de radio ISO DDIN ......... 3 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DDIN HERRAMIENTAS REQUERIDAS •...
  • Página 6: Desmontaje Tablero

    ® 95-9012 Desmontaje tablero Para radios de fábrica doble DIN: 1. Inserte los extremos largos de las herramientas de remoción de radio 86-9001 en las (4) ranuras del radio de fábrica y luego jale el radio para quitarlo. (Figura A) Nota: El borde plano de las teclas debe estar orientado hacia fuera.
  • Página 7: Ensamble Del Kit

    (8) tornillos Phillips de 5 mm suministrados. (Figura A) Localice el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Vuelva a conectar la terminal negativa de la batería...
  • Página 8: Importante

    ® Instrucciones de instalación para la pieza 95-9012 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...