Dash Disassembly - Metra 95-9012 Instrucciones De Instalación

For double DIN factory radios:
1. Insert the long ends of the 86-
9001 radio removal tools into the
(4) slots on the factory radio, and
then pull out to remove the radio.
(Figure A)
Note: The flat edge of keys should
point outward.
For single DIN factory radios
with a pocket:
1. Insert the long ends of the 86-
9001 radio removal tools into the
(2) slots on the factory radio, and
then pull out to remove the radio.
Note: The flat edge of keys should
point outward.
2. Remove the pocket, and then pull
out on the plastic tray separating
the dash cavity. (Figure B)
Continue to kit assembly

Dash Disassembly

(Figure A)
®
95-9012
(Figure B)
2