Dremel 4300 Instrucciones De Funcionamiento página 21

1600A00N3H.qxp_4300 7/8/16 10:33 AM Page 21
Bristle Brushes
These are excellent cleaning tools on
silverware, jew elry and antiques. The three
shapes make it possible to get into tight
corners and other difficult places. Bristle
brushes can be used with polishing
compound for faster cleaning or polishing.
INCORRECT:
Excessive pressure can cause wire breakage.
CORRECT: Wire tips doing the work.
Brushing Pressure
1. Remember, the tips of a wire brush do the
work. Operate the brush with the lightest
pressure so only the tips of the wire come
in contact with the work.
2. If heavier pressures are used, the wires
will be overstressed, resulting in a wiping
action; and if this is continued, the life of
the brush will be shortened due to wire
fatigue.
3. Apply the brush to the work in such a way
that as much of the brush face as possible
is in full contact with the work. Applying the
side or edge of the brush to the work will
result in wire breakage and shortened
brush life.
Dremel Accessories (Continued)
Polishing Accessories
These include an impregnated polishing
point and an impregnated polishing wheel for
bringing metal sur faces to smooth finish; a
felt polishing tip and felt polish ing wheel, and
cloth polishing wheel, all used for polishing
plastics, metals, jewelry and small parts. Also
included in this group is a polishing
compound (No. 421) for use with the felt and
cloth polishers.
Polishing points make a very smooth
surface, but a high luster is obtained using
felt or cloth wheels and polishing compound.
For best results polishing accessories
should be used at speeds not greater than
15,000 RPM.
No polishing compound is needed when
using the 425 Polishing Wheel.
Aluminum Oxide Abrasive Wheels
Use to remove paint, deburr metal, polish
stainless steel and other metals. Available in
medium grit. 1/8" shank.
Sanding Accessories
Sanding discs in fine, medium and coarse
grades are made to fit mandrel No. 402 and
EZ407. They can be used for nearly any
small sanding job you might have, from
model making to fine furniture finish ing. In
addition, there is the drum sander, a tiny
drum which fits into the Rotary Tool and
makes it possible to shape wood, smooth
fiberglass, sand inside curves and other diffi -
21