Operation; Front Panel Sensor Function; Changing The Sensor Battery - Kesseböhmer eTouch 08424P.7930 Instrucciones De Uso

Operating the DISPENSA and CONVOY Premio
Opening is initiated by pressure on the front panel. Electrically assisted opening is activated
by gently pulling the front panel.
DISPENSA and CONVOY Premio – front panel sensor function
The sensor is tasked with evaluating the pressure on the front panel and initiating the move-
ment sequence.
The sensor is activated when a battery is inserted and deactivated when the battery is remo-
ved. Deactivating the sensor by removing the battery stops automatic opening via pressure
on the front.
DISPENSA and CONVOY Premio – changing the sensor battery
The sensor uses a conventional CR2032 'button' battery. If the sensor does not respond to
pressure on the front panel, try changing the battery.
To change the battery, carefully remove the front sensor from the cabinet side wall. Take out
the old battery and replace it with another button battery the same size and voltage.
Please note the polarity!
The battery can pushed out with the help
of a thin wire (e.g. paperclip).
In the event of a power outage, or failure of the eTouch system, the larder unit
can be opened manually. users will notice slightly more opening resistance.
Note
22 l KESSEBÖHMER