Publicidad
Idiomas disponibles
Idiomas disponibles
support.dell.com
Before you begin installing your system in the rack, carefully read "Safety Instruc-
tions," found earlier in this guide.
)
$
#
*
+*,-)
+),
*-).&/
01#
)
+), 102#
+
, 3&303
4
$#
!
#
You need the following tools and supplies to install the system in a four-post rack
cabinet:
•
A #2 Phillips screwdriver
•
A flat-blade screwdriver
•
Masking tape or a felt-tip pen, for use in marking the mounting holes to be used
NOTES: If you purchased a Dell rack along with your system, the slide assemblies
may be preinstalled in the rack.
For instructions on installing the system itself, see "Installing the System in the Four-
Post Rack" found later in this guide.
To install the slide assemblies in the rack, perform the following steps:
1.
Remove the rack's front and back doors.
2.
Install the slide assemblies in the rack.
The subsections that follow include instructions for performing these tasks.
Rack Installation Guide
1-13
Publicidad
