Maintenance; Care & Cleaning - HAMPTON BAY MFI2500 Guía De Uso Y Cuidado

Maintenance

rePLaCinG LiGhT BULBs
This fireplace insert uses two clear 120 Volt, 40 Watt,
E-12 socket-base light bulbs (small base, chandelier
candle type bulbs). The light bulbs are located in the
bottom of the unit. Change the light bulbs by removing
the ember bed from the firebox. For convenience, if one
of the light bulbs burns out, it may be easier to replace
both of the light bulbs at the same time.
WarninG: Do not exceed 40 Watts per bulb. Use
of higher rated light bulbs may cause overheating
and result in a fire, causing property damage,
personal injury, or loss of life.
To replace the light bulbs:
□ Remove the two black ember screws (C) by twisting
countercloskwise.
□ Lift the ember bed (D) directly upwards and out of
the grate (E).
□ Remove the bulbs (F) by twisting counterclockwise
and replace with new bulbs.
□ Reinstall the ember bed (D) and ember screws (C).
Ensure that you securely tighten the ember screws
(C) by twisting clockwise.
C
D
F
E
Care and Cleaning
iMPOrTanT: Always unplug the power cord before
cleaning the unit. Do not use any abrasive cleaners
on the unit.
1. Any repairs to this appliance should be carried out by
qualified/authorized service personnel only.
2. Under no circumstances should this appliance be
modified. Parts having to be removed for servicing
must be replaced with original "OEM" (original
equipment manufacturers) parts only.
3. Clean this firebox with a damp cloth (water) only.
4. Unplug this firebox when not in use.
8