4 - BASIC FUNCTIONS
4.1 - Introduction
As the standard working features of this system can be modified by the installer he should have indicated the differences with the
standard factory set-up (black squares) on this manual.
4.2 - Buzzer
Activated
Deactivated
If activated the buzzer will sound in synchronism with the
turn indicators to signal the arm and disarm of the system.
4.3 - U.S. frequency selection Low-Level
Activated
Deactivated
The system allows setting the internal volumetric protection
sensitivity with two distinct modes, Minimum (Low) or
Maximum (Hi).
4.4 -Doors / bonnet / boot opened signal (See
chapter 6 "ALARM MEMORY")
Activated
Deactivated
When arming, the system signals via buzzer and turn indicators
(5 blinks) if doors, bonnet or boot are open. If they are closed
within 40 s their subsequent opening will be signalled again;
after the 40 s set up delay there is no further trigger until they
are closed and opened again.
GB
16
06DE2177B.pmd
16
4.5 - Arm/disarm blinker
Activated
Deactivated
The arming of the system is indicated by 2 blinks of the turn
indicators and disarm by 1 blink. If this function is deactivated,
the turn indicators will only blink during an alarm trigger.
4.6 - Automatic arming
Activated
Deactivated
The system will automatically arm 2 min. after the ignition is
switched off and the last door closes, but the doors will not
automatically lock. The system will not auto arm if the ignition
is switched on within 2 min.
4.7 - Immobilizer automatic arming
Activated
Deactivated
The engine immobilization will automatically activate 4 min.
after the ignition is switched off. The LED will flash. The engine
will be immobilized. Close and open the doors with the radio
control to deactivate the system.
4 - BASIC FUNCTIONS
28/05/2007, 10.33
GLOBE 4800/4900 CAN