Feature Summary - Q Acoustics m2 Manual De Instrucciones

Feature summary

IPA
™
signal sensing matrix to enable auto source selection and auto on/off.
MoviEQ
TV soundtrack. Toggle it on or off for music and movie settings.
NFC – Near Field Connection allows simple connection of Bluetooth
NFC location on the Q Acoustics speaker.
HDMI ARC – High Definition Multimedia Interface Audio Return Channel removes the need for
additional Optical or Analogue audio cables between source and speaker.
CEC – Consumer Electronics Control syncronises TV remote control of Volume, Mute and
Standby for easy integration of our Q Acoustics speaker.
Bluetooth
devices.
aptX
AVRCP – A Bluetooth control protocol that synchronises your device control of Volume and
Mute for easy integration of our Q Acoustics speaker.
DAC – Digital to Analogue Converter which determines the bit depth and sample rate of the Q
Acoustics speaker; the higher the number, the better the audio quality.
BMR – Balanced Mode Radiators are Q Acoustics mid/high driver of choice, they have a flat
radiating surface which enables their dispersion to fill a room with sound.
DVC – Dual Voice Coil subwoofers are Q Acoustics subwoofer driver of choice, it has two voice
coils in one driver for greater flexibility of design and improved bass control.
Sub Out – A Phono subwoofer output for connection to an external subwoofer. On some of
our older products the additional sub out provides a huge bottom end when used with a Q
Acoustics subwoofer.
Dynamic Bass – Improved response, loudness, depth and control of bass frequencies is
achieved through our dynamic bass enhancement system, to perfectly integrate our inbuilt
DVC subwoofer.
User EQ – User control of EQ setting for best acoustic performance. This can be changed
dependent upon speaker position, mounting, or user preference.
LSG
maximum performance from your system when connected to low output signal equipment via
HDMI or Optical.
Power Rating – Total continuous power rating of the system in Watts. Eg. BT3 = 2 x 50W =
100W.
Lip Sync – Adjustable delay for lip synchronisation between TV/screen and Q Acoustics
speaker.
3.5mm – 3.5mm jack socket for Analogue input.
RCA – Stereo phono socket for Analogue input.
– Q Acoustic's Intelligent Pre-Amplifier removes the need for a remote control through a
– Q Acoustic's Movie EQ helps to maximise the drama and excitement of a movie or
™
– An international wireless connection used for streaming audio from all compatible
®
– A high definition audio CODEC used for Bluetooth
™
–Q Acoustic's Low Source Gain switch increases the incoming signal level to get
™
®
7
devices by tapping the
®
streaming.