Aftereachuse - Craftsman 580.752150 Instrucciones De Uso

Ocultar thumbs Ver también para 580.752150:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

AFTEREACHUSE
Water should not remain in the unit for long perbds of time.
Sediments or minerals can deposit on pump parts and
"freeze" pump action. Follow these procedures after every
USe:
1.
Flush detergent siphoning tube by piacing the fiiter into
a paii of cban water whib running pressure washer in
low pressure mode. Flush for one to two minutes.
2.
Shut off engine, turn off water suppiy, point gun in a
safe direction, press red button and squeeze trigger to
relieve trapped pressure, and bt engine cool.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
underlying tissues, ieading to serious injury and
possible amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
o Keephigh pressurehosecormected to pumpand spraygun
whilesystemis pressurized.
• ALWAYS pointspraygun in safedirection,pressred button
a_d squeeze spraygun trigger,to rebasehigh pressure, e very
tirne youstop engine.
3.
Disconnect hose from spray gun and high pressure
outbt on pump. Drain water from hose, gun, and nozzle
extension. Use a rag to wipe off the hose.
4.
Empty pump of ali pumped iiquids by puIiing recoii
handb about 6 times. This should remove most liquid in
pump.
5.
6oiI high pressure hose and properly hang it on hook
provided on accessorytray.
6.
Store unit in a dean, dry area.
7.
If storing for more than 30 days see Long Term ,Storage
on next page.
WARNING
Fuei and its vapors are extremely flammable and
expiosive.
Fire or explosion can cause severe burns or
death.
WHENSTORINGFUELOREQUIP{VIENT
WiTH FUELINTANK
* Storeawayfrom furnaces stoves water heaters, c lothes
dryers,or otherappliances that havepilot light or otherignitior_
sourcebecause theycanignite fuelvapors.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido