Mpx Configuration; Setting The Analog Or Aes Inputs - Worldcast Systems ECRESO FM 5kW Guía Rápida

3.5

MPX configuration

For each of these values, use the "Enter" key to switch to edit mode, the "+" and "–" keys to adjust
values and the "Enter" key to confirm.
Press the Return button to return to the list of menus
3.6

Setting the analog or AES inputs

Browse through the MPX1 menu using arrows to set
the nominal level between -50 and +50 dBu,
Use the Check button to switch to edit mode, the
arrow keys to adjust values and the Check button to
confirm.
Press the Return button to display the MPX sub-
menus. Select the MPX2 sub-menu and set the MPX2
input in the same way.
Press the Return button twice to return to the list of
menus.
Press the up or down arrow key until you see the
Stereo Encoder menu. Then press the Check
button.
Press once again the Check button to set the audio
type. Select what you need using arrow keys:
STEREO or MONO.
Confirm with the Check button.
Press the Return button to return to the list of
menus
Press the up or down arrow key until you see the
Modulation menu. Then press the Check button.
Browse through the Modulation menu using the
arrow keys.
Set the total MPX deviation between 0 and 150
kHz,
Set the pilot deviation between 0 and 25.5 kHz.
Press the up or down arrow key until you see the
Line1 or Line2 menu. Then press the Check button.
Browse through the Line1 (or Line2) menu using the
arrow keys to set the nominal level between -50 and
+50 dBu.
Use the Check button to switch to edit mode, the
arrow keys to adjust values and the Check button to
confirm.
Press the Return button to return to the list of
menus
English version
7