EN
Opening and closing door sensor
MCE135 is a short distance IR sensor. Its ON or OFF is controlled by the opening and
closing of the door. When you open the door, the sensor detects the motion and turns
on the lights. The lights will be switched off until the door is closed.
SPECIFICATION:
Power source: 110-240V/AC
Power Frequency: 50/60Hz
Rated Current: 5A
Detection Distance: 5-6cm
Working Temperature: -20~+50℃
INSTALLATION:
Switch off the power. Install the product on the wall with two enclosed inflated screws.
Connect the sensor with power supply and the load as per the connection-wire
diagram. Then turn on the power and test it.
CONNECTION-WIRE DIAGRAM: (look at ilustartions)
1. When the door opening (>5cm), the lights will be turned on
2. When the door opening (<5cm) or being closed, the lights will be turned off
3. To get better sensitivity, you can paste one silver label as picture on the door facing
to the sensor
TEST: Turn on the power. When you open the door, the sensor detects the motion and
turns on the lights. The lights will be switched off until the door is closed.
NOTE: Within the detection field, there shouldn't be any hindered or unrest objects
affecting detection.
MCE135
MCE135
Rated Load: Max.
500W (220-240V/AC)
300W (110-130V/AC)
200W (220-240V/AC)
100W (110-130V/AC)