Descargar Imprimir esta página

Important - numskull PRO RACING WHEEL & PEDALS Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Set up the wheel on PC
1.
Turn on the PC.
2. Plug the cable from the pedals into the steering wheel.
3. Connect the USB cable of the wheel to any of the USB ports of the PC. A Windows
utility starts automatically to install the device. At the end of that operation, the LED
No 1 remains on, the wheel is now ready to use.

IMPORTANT:

The steering wheel uses the
compatible with the latest games. Some older games use the Direct Input protocol. To
switch to Direct Input mode, press and hold the Home/Mode button for 3 seconds, the
LED will flash once to indicate the change. This mode will then be used by default.
You can switch from one mode to another at any time by holding down the
Home/Mode button for 3 seconds.
Set up the wheel on PS3
1. Make sure that the PS3 is turned off.
2. Plug the wheel cable into a USB port on the console.
3. Plug the cable from the pedals into the steering wheel.
4. Turn on the console.
5. Press the HOME button on the wheel to activate the connection.
6. The player indicator LED stays lit in the middle of the steering wheel.
5. Programming function
You can now play GRAN TURISMO or any other racing games that use the default
button configuration. For other games, you have 2 options to make the right button
configuration:
• You can either go to the Options/Controllers menu in the game and create
your own configuration. The advantage is that you can save it for later gaming sessions.
IMPORTANT: Pro Racing Wheel & Pedals is identified as a
commands menu of the games.
If you wish to modify the button configuration in the game, go to the
section, not to the
• You can also use the programming function
Wheel & Pedals. It enables you to create the configuration you want without going in
the Options menu of the game, but that configuration will not be saved.
This wheel has a built-in program function: you can assign a new function to some
buttons to make your own driving comfort and experience.
8 keys can be programmed:
• Left paddle
• Right paddle
• Left pedal
• Right pedal
• L3
section.
"steering wheel"
X-lnput
protocol by default, so it is
"game controller"
on the Pro Racing
"on-the-go"
in the
"game controller"

Publicidad

loading

Productos relacionados para numskull PRO RACING WHEEL & PEDALS