Kit Assembly; Din Radio Provision With Pocket - Metra 99-8209 Instrucciones De Instalación

Ocultar thumbs Ver también para 99-8209:

Idiomas disponibles

1. Slide the brackets onto the sides of the radio housing until the

side clips engage. (Figure A)

Note: Use bracket set 1 for xA, xB, and tC. Use bracket set 2 for

the 2008 xB and xD.

2. For bracket set 1 cut and remove all mounting tabs except the

tabs being used for your application. (Figure B)

Note: Tabs are marked xA, xB and tC. For bracket set 2 skip to

step 3.

3. Remove the metal DIN sleeve from the aftermarket radio.

4. Slide the sleeve into the radio housing and secure by bending the

metal locking tabs outward. (Figure C)

5. Slide the radio back into the sleeve until it clicks in . (Figure D)

6. Locate the factory wiring harness and antenna connector in the

dash and complete all necessary connections to the radio. Metra

recommends using the proper mating adapter from Metra and/or

AXXESS. Test the radio for proper operation.

7. Reassemble the dash in reverse order of disassembly.

KIT ASSEMBLY

(Figure A)

Bracket Set 1

(Figure B)

side clips

(Figure C)

(Figure D)

1.800.221.0932

MetraOnline.com

Tabla de Contenido