Clock Setting - SOUNDMASTER UR230WE Manual De Instrucciones

Use only the supplied power adapter!
The light source contained in this luminaire shall only be replaced by the manufacturer or
his service agent or a similar qualified person.
Ensure that the voltage is the same as that indicated on the power adapter identification plate.
1. Connect the cord of the power adapter to the DC IN jack of the radio.
2. Connect the plug of the power adapter to a wall socket.
The radio is powered and in standby mode when you see the display is switched on.
Backup system
➢ The radio is equipped with a backup system. It requires a 3 V lithium battery (type: CR2032).
Insert the battery into the battery compartment and make sure the positive and negative
(+ or -) sides of the battery are in contact with the corresponding terminals in the battery
compartment.
➢ If a power cut occurs, the radio automatically switches to the battery power supply and keeps
the clock and timer settings.
➢ To open the battery compartment, use a screwdriver to detach the screw on the
compartment door.
➢ When replacing the battery, do not disconnect the power adapter. Otherwise, all clock and
alarm settings will be lost.
➢ In Backup system the display doesn´t show anything. The display is dark.
1. Make sure that the unit is in Standby. If the radio is playing any music source (i.e. radio or
nature sound), press the POWER button to switch it OFF.
2. Press and hold the SET button to enter the clock setting mode.
3. Press the SET button repeatedly to cycle through the setting options:
The display sequence in calendar / time set mode will be as follows:
Year → Month → Date → 12/24 Hour Time Format → Real Time Hour → Real Time Min →
Normal Time
➢ Press the DOWN or UP button to adjust the values in each setting option. Press and hold
the button to change the values quickly.
➢ Press the SET button to confirm each setting option.
Listening to radio
Unroll and extend the antenna to improve FM signal reception.
1. Press the POWER button to switch the music mode on.
2. Press and hold the SOURCE button to select the music mode: FM or natural sound (radio
frequency shows on the display for FM).
3. Press the DOWN or UP button to adjust frequency.
4. Press and hold the DOWN or UP button to automatically tune to the next available FM
station.
5. Press the POWER button to switch the radio mode off.
INSTALLATION

CLOCK SETTING

RADIO
2
UR230WE / English Instruction Manual